Key Features: - Back to Top -
FREE:
12 Months Motor Frame Warranty
FREE:
Lifetime Technical Support
FREE:
High Performance Front ABS Brake
FREE:
Owner's Manual Handbook/ Tool Kit
FREE:
Residential Service
FREE:
Liftgate Service
FREE:
Shipping Insurance
FREE:
24 Hours Delivery Notification
FREE:
Signed and Filled MSO / MCO and Bill of Sale provided at no extra charge
EPA / DOT Approved Street Legal:
This gas scooter is EPA and DOT Approved and is registerable as a street legal
vehicle in all 50 states including California.
95% Assembled:
The scooters come to your door 95% assembled and ready to go (battery set
up, mirrors and minor adjustments may be required).
Emergency Shut Off Switch:
This Moped comes with shut off switch in case of any emergency. With one press
of the button it automatically cuts the engine so you can stop easily.
80-100 MPG:
This motor scooter can get up to 100 miles to the gallon. This kind of gas
mileage makes this scooter very fuel efficient and economical. This vehicle is
the perfect alternative to cars and motorcycles to save on gas and keep extra
money in your pocket!
Electric Start / Kick Start:
This moped has two starting systems that allow this scooter to be very
efficient. The electric start starting system makes simple starting even easier
for anyone. The kick start can also be used at any time. The dual starting
systems are very convenient in the event that one cannot be used, and it is
always a great alternative to have two options rather than one.
Storage Compartment:
There is a large storage compartment located underneath the seat. Use this extra
space to put all your items that don't fit in the glove compartment.
 |
Constant Headlight
Unlike others, the MC_ZN50A have constant headlight which means the headlight is on whenever engine is on to insure visibility day or night. A feature that passes and exceeds DOT expectation which others do not have.
|
 |
Competitors in majority do not have a constant headlight that automatically turns on, leaving the rider less visible and more vulnerable to accidents because the traffic is less likely to spot you. Scooter Depot cares about our customers and strongly encourages the consumer to steer away from vehicles without this feature.
|
 |
Powerful Extended Engine
The MC_ZN50A offers extended motor engine that gives more power and better performance verses the majority other that do not have this feature will perform at a much lower speed. The extended engine casing provides better support and rigidity to calm the engine's natural movements such as twisting and flexing.
|
 |
The standard engine and casing that our competitors uses output less power and less fuel efficient. It is also prone to distortions brought by natural movement of the engine.
|
 |
Easy to read Instrument Panel
The MC_ZN50A have a rider-oriented design on the instrument panel that has a clear read-out of time, speed, mileage. Our competitors are still using the outdated single gauge panel.
|
 |
Our competitors have the single gauge instrument panel which leaves out important information that a rider needs such as fuel guage, RPM, odometer, etc.
|
 |
10" Premium Alloy Rim
Our 10" alloy rim projected on the left is much safer and lighter than the full metal rim on the right. Being light-weight helps the bike perform better, and it is visually pleasing too!
|
 |
The metal rim that our competitor uses is more likely to bend with light forces such as speeding over speed bump, making the life of the rim dramatically lower than alloy.
|
 |
Strategically Placed Spacious Trunk
MC_ZN50A comes equipped with a roomy trunk, combined with storage beneath the seat offers ample space for anything you might carry. A lot of resellers offer the trunk at an extra charge or do not have it at all.
|
 |
Scooters from our competitors usually do not include a trunk causes inconveniency for the rider when they need to carry a load.
|
 |
Polished, Newly Renovated Carburetor
Comparing our carburetor to our competition the MC_ZN50A carburetors have a polished surface, light-weight and increased durability. It also features an renovated internal construction to achieve better fuel economy and performance.
|
 |
Other carburetor do not have the polished surface making it hard for the liquid to flow properly, meaning it takes more resources for the scooter to run normally. That is causing the scooter to consume more gasoline but output less power.
|
 |
Top of The Line Drive Belt
The MC_ZN50A features the world renowned Premium Gates Powerlink drive belt that is passionally built to last and deliver amazing results! Best quality and one of the highest durability on the market which is commonly favored by the Japanese scooter manufacturers.
|
 |
Free Tools Kit
We offer Free Tools Kit with this model. Competitors similar items either DO NOT have it or sell $20 more! |
Specification: - Back to Top -
The material that appears on our site is for informational and entertainment purposes only. These video clips are to serve as means of demonstration of operating either the exact or similar vehicle on the site. The purpose of collected videos are to provide customers with useful and supplemental information on products we carry on site , please note the vehicles shown in the videos often share common specs, but might not be the exact model or make as the vehicles for sale on our site. The video streams of ScooterDepot.us have been gathered from the Internet, from free sites, friends, users etc. and are believed to be in the "public domain". Except as noted, no videos on this site are affiliated with ScooterDepot.us. If you are a copyright holder and there is any specific intellectual property that you do not wish them to appear on the site, please contact us and they will be removed immediately on demand.
| ITEM: MC_ZN50A 50cc Gas Moped Scooter |
| Engine / Drive Train |
| Engine Type |
50cc 4 Stroke Single Cylinder |
| Carburation |
Single Walbro Carburator |
| Max Horsepower |
2.3 KW/8000 rpm 4HP |
| Cooling System |
Air Cooled |
| Transmission |
Automatic Clutch-Less Centrifugal Belt Drive CVT |
| Driveline |
Belt Driven |
| Starting System |
Electric/Kick Start |
| Ignition |
CDI |
| Max Speed |
33+ MPH (Depending on Riders Weight and Road Conditions) |
| Max Torque |
2.8/6000 |
| Battery |
12V/7Ah |
| Fuel Capacity |
1.1 Gallons |
| Brakes / Suspension / Chassis |
| Frame |
Steel |
| Front Suspension |
Dual Telescopic Fork |
| Rear Suspension |
Mono Shock |
| Front Brakes |
Hydraulic ABS Disc Brake |
| Rear Brakes |
Drum Brake |
| Brake Operation |
Hand/Hand Brake |
| Front Tires |
3.00-10 |
| Rear Tires |
3.00-10 |
| Clutch |
Automatic CVT |
| Controls / Safety |
| Age Recommendation |
Adult |
| Thumb Throttle (Y/N) |
N |
| Brake Pedal (Y/N) |
N |
| Remote Start (Y/N) |
N |
| Remote Engine stop (Y/N) |
N |
| Remote Alarm (Y/N) |
N |
| Speed Governor (Y/N) |
N |
| Light |
Headlights, Turn Signals, Tail Lights, Brake Lights |
| Capacities / Dimensions |
| Weight Capacity |
330 lbs |
| Net Weight |
176 lbs |
| Gross Weight |
198 lbs |
| Length |
67 inches |
| Width |
26 inches |
| Height |
42 inches |
| Set Height |
30 inches |
| Warranty |
| Engine |
1 Year |
| Frame |
1 Year |
| Free |
Rear Truck, Tool Kit, Technical Support |
| Government Certifications |
| DOT |
DOT Approved |
| EPA |
EPA Approved |
| C.A.R.B. |
C.A.R.B. Appeoved |
| Assembly |
| Assembly |
Some Assembly Required. Mirrors and Trunk may be required |
| Tool Kits |
FREE Assembly Tool Kits Included |
| Local Pick Up |
| Assembly Fee |
$150 Assembled by our Certified Mechanic. Please Call 909-287-0366 first. |
| DMV Fee |
$190 California DMV Registration Fee |
| C A Tax |
8.75% California Sold / Outside of California Tax Exempt |
Description: - Back to Top -
The 50cc gas scooter is a stylish product well worth the
inexpensive price tag. Not only will you be riding this comfortable moped at
your leisure, but you'll be saving money and causing jealousy in your
neighborhood. The look and feel of this compact two wheeler will bring you back
to the days when Vespa seemed like an inexpensive alternative to the
megalomaniacal practices of corporate car manufacturers. Now that time has
passed and we need a new scooter with the classic feel of those revolutionary
days. Well here it is.
Not only will you save money on the purchase, but you will also save at the gas
pump. This moped scooter pumps out around 80 to 100 miles per gallon. Compare
that to 25 mpg for the average small to mid-sized car. Now you can still get to
your destinations, but you'll have a lot more cash on hand to spend on yourself,
rather than your commute.
Let's not forget about the slick style of this inexpensive motor scooter. Its
two-tone color and vintage design will be a beacon of individualism in a crowd
of cookie-cutter cars. You'll also have the advantage of chrome headlight look,
instrument panel, engine, and decals. So not only will it be a metaphorical
beacon of light, on a sunny day it will be literal as well.
Add to this all the extra upgraded features like front ABS disc brake. this one
will arrive at your door fully assembled! No having to hassle with attaching
parts, handlebars and front wheel to get it started. You just have to open it
up, insert battery, check fluid levels, gas it up and go!
Warranty:
one year warranty on Motor and frame. Buyers are required basic repair skills such as using general tools; replacing nuts & bolts, filters, light bulbs, fluids, etc. The warranty is effective only if:
• The product is used under normal conditions for its intended purpose;
• The product receives all necessary maintenance and adjustments.
Free Registration documentation:
We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.
Technical Support:
We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.
Some Assembly required:
Usually takes about 10 minutes. The Bike are completely assembled in the factory and fully tested. Battery and the rear mirror are removed after testing. Item will be shipped in a crate, to assemble, put the above items back on. For safety precautions, be sure to check and tighten all nuts and bolts prior to use. Be sure to check for appropriate engine fluid levels to ensure your vehicle is operating under the recommended conditions prior to use any additional questions, please call our tech support at toll FREE 1-888-839-7088. (Local pick-ups optional assembly available!)
Remember!
You are responsible for performing the setup that a dealer would normally perform - such as putting on rear view mirrors and handle bar cover, hooking up the battery, checking tightness of all nuts and bolts, changing oil, etc. Occasionally some units may need other routine items checked/adjusted such as adjusting the carburetor idle and mixture screws, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed. While we will gladly assist you with any technical questions.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
