This fashionable vehicle comes with the latest in body design for cutting edge style, and it is built for a person looking for a transportation option that can keep pace with other motorized traffic, whether in the sprawled expanse of the suburbs or the concrete jungle of the city.
Powering this mid-sized scoot is a fuel sipping 150cc single-cylinder 4-stroke engine. It’s mated to an automatic transmission, which makes traveling to your destination literally as easy as twisting your wrist.
On level road, the Znen Phoenix 150 will accelerate to right around 50 mph rather fast without a hint of vibration.
Average sized riders will appreciate how much room there is while seated and even my 6-foot tall frame wasn’t cramped at the controls of the Znen Phoenix 150. Also the distance between the rider and the handlebars is short, which translates into a very relaxed riding position with your elbows resting to the side naturally.
On the Road: What a Difference 16 Inches Make
When it comes to road manners, the ZNEN Phoenix 150 16” wheels significantly aid handling and stability, two dynamics usually lacking in scooters. The wheel size makes this scooter slightly less Hyper-responsive at slower speeds, but the welcome tradeoff for that low speed maneuverability is higher speed stability and improved bump absorption.
Braking is provided by an ABS Hydraulic front and rear discs mounted near the large 16 inch front and rear wheels.
How about that storage space? The under-seat storage alone swallowed up a helmet, a laptop, and any other small personal belongings, with a little room to spare!
You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.
Remember every purchase from Scooter Depot includes:
US EPA (Environmental Protection Agency) APPROVED
Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)
US DOT (Department of Transportation) APPROVED
This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states. Title, stickers, and other registration documents will be included with your purchase.
Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.
Free Registration documentation: We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.
Where to locate your VIN#:
Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.
Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.
Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.
The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to email@example.com include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.
Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.
Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request.
Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, valve adjustment etc.). In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.
Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications.
Please, feel free to contact our technical support team at firstname.lastname@example.org or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.
|Engine Type||150cc, 4-Stroke|
|Max Horsepower||9.6HP/7500 rpm|
|Number of Gears||No|
|Starting System||Electric / Kick Start|
|Max Speed||60+ MPH (Depending on Riders Weight and Road Conditions)|
|Max Torque||8.3 nm/6000 rpm|
|Fuel Capacity||1.6 Gallons|
|Frame||Reinforced Steel Tube|
|Front Suspension||Dual Telescopic Forks|
|Rear Suspension||Dual Shock|
|Front Brake||Hydraulic ABS Disc Brake|
|Rear Brake||Hydraulic Disc Brake|
|Front Tire||100/80-16-4PR with Aluminum Rim|
|Rear Tire||120/80-16-4PR with Aluminum Rim|
|Lighting||Headlights, Turn Signals, Tail Lights, Brake Lights|
|Weight Capacity||360 lbs|
|Number of Riders||2|
|Dry Weight||282 lbs|
|Seat Height||31 inches|
|Overall Length||85 inches|
|Warranty||Engine 1 year, frame 1 year|
|Carton Size||78" X 22.5" X 46.5"|
|Assembly||This Item comes 95% assembled (battery set up, Trunk, mirrors and minor adjustments may be required). Be sure to tighten all screws and check for appropriate levels of engine fluid prior to operation. Warranty is valid straight from the box.|
|Restrictions||Street legal in all 50 states**For Shipments to Washington, D.C. Maryland, Massachusetts, Maryland, Florida, New York, Pennsylvania, New Jersey, Virginia, West Virginia, Maine, Connecticut, Vermont; an additional freight charge of $75 up to $175 is requir|
Note: Scooter performance may vary depending upon weather conditions, terrain conditions, length of use and wieght of rider.
|Local Pick Up|
|Assembly Fee||$150 Assembled by our Certified Mechanic. Please Call 909-287-0366 first.|
|DMV Fee||$140 California DMV Registration Fee|
|C A Tax||8.75% California Sold / Outside of California Tax Exempt|
WHY BUY FROM US?
Simple, we make customer satisfaction our top priority. We take care of the customers that buy from us - GUARANTEED!
Sunny Sports Inc. is dedicated to providing our customers with the best service possible! We will continue to strive to make www.ScooterDepot.us your first choice for the best products, fast shipping and superior customer services.
With so many companies to choose from, you may wonder why buy from us? We have steadily grown our business over the last 6 years. From this solid and successful foundation, we plan to continue serving as a major market supplier of high quality motor sports products. Our staff includes an outstanding; customer oriented sales team, a dedicated customer service, parts & technical support team, shipping department, exceptional internet marketing personnel and a research and development department committed to providing the very best products available.
Everyday customers tell us how happy they are that they found us. Here is a partial listing of the reasons why you should buy from us instead of a competitor:
1. Wholesale price open to public- low discounted Prices
15. We respect your privacy.
16. Simple Secure Checkout- We make your purchase as easy as possible!
17. Product Reviews
◊ SSL Secure Web Site Ordering!